Product Profile
MICROCEL® 200 SD
Microcrystalline Cellulose
Product Name | MICROCEL® 200 SD |
Generic Name | Microcrystalline Cellulose |
Physico-chemical properties | |
Compliance | EP/USP-NF/JP |
Synonyms | Cellulose, Microcrystalline |
CAS Number | 9004-34-6 |
Chemical Structure |
![]() |
Physical Form or Appearence | White, non-fibrous powder |
Application | MICROCEL® 200 SD microcrystalline cellulose is a direct compression excipient for pharmaceutical oral dosage and nutraceutical forms (fiber source). It has very high compactibility and improved flow properties. MICROCEL® 200 SD is a spray-dried product from EXCiPACTâ„¢ (International Pharmaceutical Excipients Certification) certified plant. |
Water content (LOD) |
Water Content (LOD) Maximum: 5 % |
Morphology |
![]() |
Average mean particle diameter | 180 µm |
Particle Size Distribution by Laser Diffraction |
dv10: 84.4 µm dv50: 198 µm dv90: 386 µm |
Solubility | Slightly soluble in 5% w/v sodium hydroxide solution; practically insoluble in water, dilute acids, and most organic solvents |
Water sorption isotherm at 20°C |
![]() |
Taste/Odor | Odorless and tasteless |
Tablet hardness |
![]() |
Experimental Conditions for Compression Behavior |
Tablet Press: STYLCAM 200R Production Speed: 10 and 40 tablets/min (respective linear punch velocity: 38 and 152 mm/s; respective simulated rotary press speed: 60000 and 250000 tablets/hour) Tooling: Diameter 10 mm flat Formula: 100% MICROCEL® 200 SD Tablet Mass: 400 mg |
Powder Characteristics |
Powder Flowability (according to Ph.Eur. 2.9.16, 10mm outflow opening): 8 s Bulk Density: 0.36 g/cm3 Tapped Density: 0.46 g/cm3 True Density: 1.54 g/cm3 Specific surface area: 1.37 m2/g Angle of Repose: 32 ° |
Â
Disclaimer
These typical values are provided for information only and we believe them to be reliable. Methods available upon request.