LIFTGLOW
Foundation for a radiant and lifted glow
Looking for visibly younger-looking skin? This light, velvety foundation provides an immediate lifting effect, leaving the complexion fresher and skin smoother.
What's inside?
- Beauté by Roquette® ST 012 delivers multiple sensorial benefits,
- Beauté by Roquette® ST 730 film-forming agent with a lifting effect.
Natural origin: 95.8%
| INGREDIENT (INCI) | COMMERCIAL NAME (SUPPLIER) | %W/W |
PHASE A | Coco-Caprylate/Caprate | Cetiol® C5 (BASF) | 9.00 |
| Magnesium Stearate | Magnesium stearate (Cooper) | 2.00 | |
PHASE B | Polyglyceryl-6 Polyhydroxystearate, Polyglyceryl-6 Polyricinoleate | Emulium illustro (Gattefossé) | 5.00 |
PHASE C | Dicaprylyl Ether | Cetiol® OE (BASF) | 5.00 |
| CI 77891, Hydrogenated Lecithin | Unipure White LC981 HLC (Sensient) | 5.00 | |
| CI 77492, Hydrogenated Lecithin | Unipure Yellow LC182 HLC (Sensient) | 1.20 | |
| CI 77491, Hydrogenated Lecithin | Unipure Red LC381 HLC (Sensient) | 0.20 | |
| CI 77499, Hydrogenated Lecithin | Unipure Black LC989 HLC (Sensient) | 0.10 | |
| Caprylic/Capric Triglyceride | Labrafac CC MB (Gattefossé) | 5.00 | |
PHASE D | C-9-12 Alkane | Harmonie™ SOFT FLUID (Momentive) | 5.00 |
| Aluminum Starch Octenylsuccinate | Beauté by Roquette® ST 012 (Roquette) | 1.00 | |
PHASE E | Aqua | Demineralized water | Up to 100 |
| Hydroxypropyl Starch | Beauté by Roquette® ST 730 (Roquette) | 6.00 | |
| Glycerin | Glycerin (Cooper) | 1.00 | |
PHASE F | Magnesium Sulfate | Usp Magnesium Sulfate, Anhydrous (KOBO) | 1.00 |
| Phenoxyethanol, Chlorphenesin, Aqua, Glycerin | Microcare® PHC (THOR) | 1.00 | |
| Sodium Chloride | Sodium Chlorure (Cooper) | 1.00 |
PROCESS
- Prepare phase C (oil and pigments) under agitation with the defloculator for 10-15 minutes to disperse pigments,
- Mix phase C and phase D,
- Heat phase A at 90°C until homogeneous dispersion and after add phase B,
- Add phase A and B in C and D,
- In parallel prepare phase E, disperse Beauté by Roquette® ST 730 in water at 80°C for 15 minutes at 2,000 rpm,
- Add successively ingredients of phase F in E,
- Emulsify very slowly phase E and F in oily phase (A+B+C+D).
FORMULATION SPECIFICATIONS - MU-037-021 | |
| ASPECT | Beige emulsion |
| pH | Not applicable |
| VISCOSITY | 2,400 – 3,600 mPa.s (Brookfield RV, SP54, 20 rpm, 1 min) |
| STABILITY | 2 months at 4°C, room temperature, 40°C and 50°C |