SKIN REVIVAL
Whole body exfoliating gel
This exfoliating body gel is ideal for removing dead skin cells and leaving skin soft and smooth. With its gentle exfoliating particles, it thoroughly cleanses while moisturizing the skin.
What’s inside?
- Beauté by Roquette® LS 007 preservative booster, helping to reduce the level of listed preservatives,
- Beauté by Roquette® SA 130 gentle exfoliant, purifying the skin,
- Beauté by Roquette® ST 118 gelling agent, providing a silicone elastomer-like texture,
- Beauté by Roquette® PO 070 plant-based humectant, providing moisturizing properties.
Natural origin: 86.5%
INGREDIENT (INCI) | COMMERCIAL NAME (SUPPLIER) | %W/W | |
| Phase A | Aqua | Demineralized Water | Up to 100 |
| Sorbitol | Beauté by Roquette® PO 070 (Roquette) | 5.00 | |
| CI 42090 | Unicert Blue 05601-J (Sensient) | QS | |
| CI 19140 | Unicert Yellow 08005-J (Sensient) | QS | |
| Phase B | Hydroxypropyl Starch | Beauté by Roquette® ST 730 (Roquette) | 4.00 |
| Phase C | Decyl Glucoside | Plantacare® 2000 UP (BASF) | 4.00 |
| Glyceryl Oleate | Monomuls® 90-O18 (BASF) | 1.00 | |
| Coco-Glucoside | Pureact Gluco C (IPC) | 4.00 | |
| Phase D | Sodium Hydroxide | Sodium Hydroxide | 0.30 |
| Phase E | Succinic Acid | Beauté by Roquette® SA 130 (Roquette) | 2.00 |
| Phase F | Jojoba Esters, Titanium Dioxide, Blue 1 Lake, Yellow 5 Lake | Florabeads® Jojoba 28/60 Arizona Sky (Floratech) | 0.50 |
| Jojoba Esters, Iron Oxides | Florabeads® Jojoba 28/60 Onyx (Floratech) | 0.50 | |
| Jojoba Esters | Floraesters® 70 (Floratech) | 2.00 | |
| Phase G | Potassium Sorbate | Microcare® KS (Thor) | 0.40 |
| Aqua | Demineralized Water | 2.00 | |
| Phase H | Gluconic Acid, Caprylyl/Capryl Glucoside, Cymbopogon Citratus Leaf Oil | Beauté by Roquette® LS 007 (Roquette) | 1.00 |
| Phase I | Fragrance | Fragrance | QS |
PROCESS
- At room temperature, prepare phase A,
- Add phase B under defloculator stirring and disperse it to form the gel (2,000 rpm, for approximately 15 minutes),
- Prepare phase C under stirring until homogeneity. Add it to phase A+B under gentle stirring (500 rpm, avoid over-foaming),
- Add the phase D under stirring, and then add phase E,
- Add successively each ingredients of phase F,
- Dissolve the preservative in water (phase G) and add it in the preparation. Add phase H and phase I.
FORMULATION SPECIFICATIONS - SC-083-004/1 | |
| Aspect | Blue gel with exfoliating beads in suspension |
| pH | 5.0 ± 0.3 |
| Viscosity | 20,000 - 30,000 mPa.s (Brookfield RV, SP6, 20 rpm, 1 min) |
| Stability | 2 months at 50°C 3 months at room temperature and 40°C |