MICROCEL® 113 SD
Microcrystalline Cellulose
| Product Name | MICROCEL® 113 SD |
| Generic Name | Microcrystalline Cellulose |
| Physico-chemical properties | |
| Compliance | EP/USP-NF/JP/CHP |
| Synonyms | Cellulose, Microcrystalline |
| CAS Number | 9004-34-6 |
| Chemical Structure |
|
| Physical Form or Appearence | White, non-fibrous powder |
| Application | MICROCEL® 113 SD microcrystalline cellulose is a filler/binder and fiber source for pharmaceutical oral dosage and nutraceutical forms. It has optimized moisture content and compactibility and is primarily used in roll compaction. MICROCEL® 113 SD is a spray-dried product from EXCiPACT™ (International Pharmaceutical Excipients Certification) certified plant. |
| Water content (LOD) |
Water Content (LOD) Maximum: 2 % |
| Water activity | 0.08 |
| Morphology |
|
| Average mean particle diameter | 50 µm |
| Particle Size Distribution by Laser Diffraction |
dv10: 19 µm dv50: 57 µm dv90: 131 µm |
| Solubility | Slightly soluble in 5% w/v sodium hydroxide solution; practically insoluble in water, dilute acids, and most organic solvents |
| Water sorption isotherm at 20°C |
|
| Taste/Odor | Odorless and tasteless |
| Tablet hardness |
|
| Experimental Conditions for Compression Behavior |
Tablet Press: STYL'ONE EVO Production Speed: 25, 29 and 65 RPM (linear punch velocity: 35, 41 and 91 mm/s; simulated KORSCH XL-400 rotary press speed: 52,500, 60,900 and 136,500 tablets/hour) Tooling: Diameter 10 mm flat Formula: 100% MICROCEL® 113 SD Tablet Mass: 400 mg |
| Powder Characteristics |
Bulk Density: 0.3 g/cm3 Tapped Density: 0.51 g/cm3 True Density: 1.54 g/cm3 Specific surface area: 1.13 m2/g Angle of Repose: 39 ° |
Disclaimer
® Registered trademark(s) of Roquette Frères. Any information provided herein is intended for healthcare and food industry professionals for internal use only and not to be delivered as such to final consumers. Information is based on our current state of knowledge and made available on an informational basis; products described may have restrictions with respect to their use, communication, and/or usage levels, and such may vary on a country-by-country basis. Manufacturers of dietary supplements should evaluate the intended use of the particular ingredient in their finished dietary supplement to confirm compliance with the applicable laws and regulations of authorities regulating such products, because the suitability and regulatory status of a product may be dependent on its specific intended use. As the use of these products is beyond our control, Roquette makes no express or implied warranties regarding the use of the product and no guarantee of product properties, and in particular no express or implied warranties regarding the use of the product in dietary supplements, including without limitation the implied warranties of merchantability and fitness for a particular purpose, and Roquette disclaims liability for any loss and/or damage related to such use. Roquette, further, does not warrant that the information or its use will not infringe any patent or other proprietary rights of any third party. Roquette providing this information is not a commitment to sell any product encompassing any of such information in the future.